system-on-module

Grinn Test Add-on for Synaptics® Coralboard™

Grinn Test Add-on connects to the Synaptics® Coralboard™, extending the development platform with tools for display interface testing, firmware debugging, status indication, and power monitoring.


It features a four-lane DSI-to-HDMI 1.4 interface based on the LT9611 converter, a two-port USB 2.0 hub with an on-board CP2102N-A02 USB-to-UART bridge, four individually controlled LEDs, and a controllable buzzer. Four INA4230 current-shunt monitors measure 15 Coralboard power rails. The bridge can also pull the Coralboard USER and RESET button signals low, which gives boot-mode and reset control from the host PC.


The board mounts below the Synaptics® Coralboard™ on four integrated standoffs. It connects through a 22-pin DSI connector and spring-loaded pogo contacts.


For developers working with the Synaptics® Coralboard™, the add-on is a practical tool for board bring-up, validation, and development work.

Specifications
  • Interface
    • 1x 22-pin DSI ZIF connector (J2)
    • Spring-loaded pogo contacts J3, J4 and J6–J44
  • Display
    • 1x HDMI receptacle (J1)
    • LT9611 four-lane MIPI DSI-to-HDMI 1.4 converter
    • 4x DSI data lanes + DSI clock
    • HDMI hot-plug detect and interrupt
    • I²C control via TW3
  • USB
    • 1x USB-C (J5), upstream port of the USB2422 two-port USB 2.0 hub
    • Downstream port 1: CP2102N-A02 USB-to-UART bridge
    • Downstream port 2: exposed on pogo contacts J6 and J7
    • UART TX / RX / CTS / RTS on pogo contacts J8–J11
    • Boot-mode and reset control
  • LED
    • 4x independently controlled LEDs (red, yellow, green, blue)
  • Input voltage
    • 3.3 V (supplied by host via J2)
    • 5 V (USB-C VBUS, J5)
  • Ambient operating temperature
    • 0°C to +70°C (Commercial)
  • Buzzer
    • 1x MLT-9650, 5 V
  • Current measurment
    • 4x INA4230 current-shunt monitors on the TW3 bus
    • 15 monitored rails
  • Form factor
    • 73.5 mm × 68.2 mm
Grinn Test Add-on for Synaptics® Coralboard™
ready-to-use

Other products

Grinn GenioBoard - Edge AI SBC
Grinn GenioBoard - Edge AI SBC

A powerful, open-hardware single-board computer designed for professionals and developers who need more computing power and enhanced functionalities.

Grinn EvseSOM RPI HAT
Grinn EvseSOM RPI HAT

The Grinn EvseSOM RPI HAT is a Raspberry Pi-compatible development and evaluation platform for integrating the Grinn EvseSOM with a host processor through a 40-pin GPIO interface. Designed for eMobility applications, it provides UART, Control Pilot (CP), Proximity Pilot (PP), and safety control interfaces for EV charging development and testing.

Grinn AstraSOM-261x
Grinn AstraSOM-261x

System on Module featuring a dual-core Cortex-A55 processor, Mali-G31 GPU, and a dedicated 1 TOPs NPU. The world's smallest SoM at 25x25mm - ideal for compact Edge AI and industrial IoT applications.

Got an IoT Idea? Let's Chat!

We're excited to hear about your IoT product ideas. Whether you need help with a small detail or a big project, we're here to make it happen.

AWARDS AND CERTIFICATIONS

REVIEWED ON
4.8 / 5.0

Your message
was sent!

Thank you for contacting us.
We will get in touch as soon as possible!

Your message
was sent!

Thank you for contacting us.
We will get in touch as soon as possible!

Your message
was sent!

Thank you for contacting us.
We will get in touch as soon as possible!